Field repairable (can be fully disassembled)
Super adjustable and fits any bike (using Spacer Blocks to prevent interference with brake levers, and cables)
(2) Spacer Blocks included
(2) Foam Spacers included (*additional spacers sold separately, more info here)
Bounce free lower velcro attachments to fork crown and/or elastic cord to headtube
(2) 32” Logo Voile Straps included
Durable plastic body
Works with bags 4" to 9" in diameter
Harness + Dry Bag
Step 1
Position harness on handlebars using the double back velcro straps. This is just to hold the harness in place while you take your bag on and off.
Attach lower velcro straps around each side of your fork crown.
Step 2
If your fork crown is too small or it interferes with your brake, attach the elastic cord around your head tube, instead of using the velcro straps. You can also use both.
Step 3
Strap your bag to the harness using the rubber Voilé straps. Lace the rubber Voilé straps through the plastic loop, then the metal buckle. They will go over your handlebars and the velcro straps.
Harness + Drawcord Handlebar Bag
Step 1
Lace the rubber Voilé straps through both upper and lower webbing slots.
Wrap the elastic cord around the two rubber voile straps. This extra step locks in the handlebar bag position so it can't slide up and down.
Step 2
Secure your bag of choice with the Voilé straps, same way as shown above with the harness alone.
(Optional) You can tuck any excess strap into a slot to keep things tidy.
Step 3
Secure lower attachments and tighten all straps. The lid cord will reach over the entire setup to your stem.