Foam Spacer Kit
Foam Spacer Kit
These 1/2" thick foam spacers integrate with our handlebar bags to space it away from rim brakes and cables or to change the angle of the bag. They go against your head tube or fork crown. For the upper handlebar attachments, we now recommend the hard plastic spacer block.
Most bag and bike combos don’t need these but if you are having issues with fitment, these may help. The examples below are listed by handlebar and brake type.
Compare your bike to the ones below for optimal cable routing and spacer configuration. Clicking on the images will pop up a description.
Foam spacer kits include
(6) 1/2” thick foam spacers
(1) double sided velcro strip
Riser/flat handlebars with disc brakes: (0-5) spacers on each handlebar attachment, (0) spacers on lower attachment
Riser/flat handlebars with cantilever brakes: (0-3) on each handlebar attachment, (0-3) on lower attachment
Drop handlebars with disc brakes: No spacers needed
Drop handlebars with dual-pivot/side-pull/mini-v brakes: (0-2) on each handlebar attachment, (0-3) on lower attachment
Swept-back handlebars with any brakes: No spacers needed
How-To
For the handlebar attachment points, slip the webbing and buckle through the center of the spacers. For the lower attachment point, slip the cord and cord lock through the spacers. Velcro the spacers together, tightly. Installation is the same for the Stuff Sack Harness.
